Core Tip: Although the recycled plastic granulator is a large energy consumer in China, the energy used accounts for about 12% of the total energy consumption of the national economy. However, with the recent efforts of the state to promote the development and transformation of the plastic recycling granulator industry, huge Market demand has also made the market for recycled plastic granulators more and more optimistic.
Although the recycled plastic granulator is a large energy-consuming household in China, the energy used accounts for about 12% of the total energy consumption of the national economy. However, with the recent efforts of the state to promote the development and transformation of the plastic recycling granulator industry, huge market demand, It also makes the market for recycled plastic granulators more and more optimistic.
In recent years, the treatment, recycling and utilization of waste plastics have been increasingly valued by countries all over the world. China is no exception. The support of policies is a favorable guarantee for the development of recycled plastic granulators. In addition, the advantages of recycled plastic granulators make it possible. Continue to develop.
First, China's waste plastic recycling rate is not high, there are not many waste plastic recycling plants, especially uneven distribution, most places are almost blank; on the other hand, in recent years, China's industrial development is rapid, the market is prosperous, the large plastics market has Dozens of scrap plastic pellets have been in short supply, and prices have risen and then risen. Therefore, waste plastic pellet processing will become a hot spot for future development. As a main processing machine, recycled plastic pelletizers will have a large customer base.
Second, the plastic recycling granulator processes the waste plastics of daily life to regenerate the plastic raw materials needed by the enterprise. The price of recycling waste plastics is far cheaper than the price of plastic raw materials that have been rising in recent years. With the strong support of the state. The new type of recycled plastic granulator is continuously optimized and updated to achieve full, firm and smooth recycled plastic raw materials. Therefore, it will be favored by more and more businesses.
Third, due to the small risk of establishing recycled plastic pellets, the scale of investment can be large, and the entrance to the door is also low, you can start from a production line, or you can purchase multiple sets of equipment at the same time. But the profits are higher, so there will be more factories in the future, which is undoubtedly a huge business opportunity for recycled plastic granulator equipment manufacturers.
Therefore, in exploring the new development path of plastic granulator technology, energy efficiency, environmental protection and product quality must be considered comprehensively in order to achieve comprehensive, coordinated and sustainable development. To implement the development strategy of high-efficiency and green plastic granulator, we must first take the path of resource-saving development, and become a combination and intelligent plastic granulator.
It is necessary not only to carry out fundamental transformation from the plastic granulator process, but also to carry out comprehensive and multi-level energy-saving technical transformation, and vigorously develop plastic granulator technology using renewable energy and industrial waste heat. From the government level, it is necessary to establish and improve the comprehensive evaluation criteria and industry standards for plastic granulator equipment, establish macro-control and market regulation mechanisms, and accelerate the upgrading of plastic granulator technology.
O Ring , Rubber O Ring: An O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a round cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
O ring are installed in the groove, moderate compression section for type O Sealing Ring (circle). Because of its manufacturing cost is not high, convenient installation and therefore has been widely used in the sealing industry.
O-ring mainly used for fluid (such as: water, oil, air, chemical solvents, chemicals, etc.) and sealing the gap between a static long-term use temperature of -60 â„ƒ to 220 â„ƒ.. Varies on material, the use of static pressure is less than 20MPa. Sometimes for dynamic, dynamic pressure when using less than 5MPa. And semiconductor vacuum seal.
An o-ring technically is also a gasket but it's shape and the material it is made from differs from most gaskets. The biggest difference between the two is o-rings are almost exclusively used for very high pressure applications such as hydraulics where a regular cork, paper or Rubber Gasket would fail.
Gasket is also called as static seal. It is a mechanical element use to prevent the leakage of fluid between the two components which are static or doesn't have relative motion. While Oil Seal also called as dynamic seal is use to prevent leakage of fluid between two components having relative rotary or sliding motion.
A gasket is primarily used to seal two mating surfaces. It prevents leakage of fluids. Washers on the other hand are used primarily to spread pressure evenly, and are used in places of high vibration.
A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut.
Our Factory used materials: Nitrile Rubber, Silicone Rubber, Fluorine Rubber, EPDM Rubber, Acrylic Resin, Tetrapropanate Fluorine Rubber, Chloroprene Rubber, Epichlorohydrin Rubber, Fluoro Silicone Rubber, Hydrogenated Nitrile Rubber, Butyl Rubber, Natural Rubber, Polyurethane Rubber, Styrene Butadiene Rubber, PE, PTFE and so on.
Sealing Ring,Rubber Seal Ring,Plastic Washer,Rubber Gasket
Zhejiang Dream Industry Limited , https://www.mlwdream.com