At present, cement kiln waste disposal waste and mature advanced grate furnace incineration technology, the main problems are as follows: First, the emission standards are low. If cement kiln waste disposal waste is discharged according to the cement industry emission standards, it will have a significant impact on the surrounding environment. The second is that the overall cost is not low. Although the disposal of domestic garbage in cement kilns saves the investment in incinerators, if the discharge standards are implemented in accordance with the high standards of the grate furnace projects, a large amount of technical reforms will be required. Third, social risks are not low. In the absence of garbage classification, instability of the waste composition will affect the stability of cement quality.
Suggest:
1. At the policy level, a complete set of policies and regulations for pollution control, environmental standards, construction standards, subsidy policies, and taxation policies are in place. The supporting waste collection system, financial support policies, tax incentives, etc. must be consistent with grate furnace incineration methods to form a fair competition under the same emission indicators and treatment costs.
Second, at the planning level, we must adapt to local conditions and seek truth from facts. Grate furnace incineration power generation technology is the main method in developed countries, and it is suitable for large and medium-sized domestic garbage disposal projects. Cement kiln waste treatment technology is generally applicable to large cement plants in the immediate vicinity. Considering factors such as land, transportation, technology, and economy, we can plan cement kiln co-processing garbage waste projects in areas not far from the cement plant.
Third, at the technical level, it is necessary to set up special projects for scientific and technological research, increase financial support, continuously improve supporting technologies, and increase emission standards. As soon as possible to improve the national standards for cement kiln sludge, domestic waste and solid waste.
Fourth, at the social level, it is necessary to promote propaganda, solve doubts, and form consensus. The masses should be organized to observe the feelings of mature, garden-like waste incineration projects without any odors, and win the approval of the masses with strict emission standards.
V-Profile Press fitting pipeline system is widely used in cold and hot water supply, heating supply, fire protection, medicinal gas, industrial petroleum pipeline system etc.
Compared with traditional pipeline system, it`s not only more economical, safer and healthier, but also easier and faster for installation with longer service life.
1. Press fitting range:
Coupling -- Equal coupling, Reducing coupling, Slip coupling, coupling with male/ female threads;
Elbow -- Equal elbow, Elbow 90°, Elbow 45°, Reducing elbow, Elbow with plain end, Elbow with wall plate, and Elbow with male/ female threads;
Tee -- Equal tee, Reducing tee, Tee with wall plate, and Tee with male/ female threads;
Others-- Pipe cap, Pipe Bridge and Flange connector.
2. Material: Stainless steel 304L, Edelstahl 1.4306/ Edelstahl 1.4301, AISI304L, Inox304L;
Stainless steel 316L, Edelstahl1.4404, AISI316L, Inox316L;
Galvanized carbon steel, 1.0034C-Stahl, Kohlenstoffstahl, ACCIAIO AL CARBONIO.
3. Size: 3/8``-4``inch or as request, pipe wall thickness: 1.0--2.0mm
Sizes range:
DVGW W534:1995: 15, 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108mm.
JIS G 3448-1980: 15.88, 22.22, 28.58, 34.00, 42.7, 48.6, 76.1, 88.9, 108mm.
4. Standard:
Press fitting standard: (DIN) DVGW W534-1995; (JIS) JWWA G116:2001; GB/T 19228.1-2003
Pipe standard: DIN10312:2003; GB/T 19228.2-2003
O-ring sealing standard: CEN EN 681-1:2006; GBT 19228.3-2003
5. O-Ring Seal: "Chlorinated butyl rubber" (CIIR), EPDM, HNBR, NBR and FKM, etc.
EPDM (black): max working pressure 16bar, working temperature from -20℃ to 120℃, Suit medium: cold and hot water, compressed Air etc.
6. Galvanization: all carbon steel pipe fittings are plated with rust-resistant zinc.
7. Anneal: all stainless steel pipe fittings are annealed in inert gases before packing.
Installation and Connection Order
Equipments And Quality Control
Orderly Workshop
Efficient Anneal Equipment
Pressure Testing
Tensile Testing
Stainless Steel V-Profile Press Fittings(JIS)
Stainless Steel V-Profile Press Fittings,Equal Tee Press Pipe Fitting,V Profile Steel Elbow Press Fitting,V Profile Female Tee Press Fitting
WENZHOU KASIN VALVE PIPE FITTING CO., LTD. , https://www.kasinvalvefitting.com