With the continuous development of lamps, people have higher and higher requirements for home interior lighting. People not only require indoor lighting fixtures to have a high brightness, but also require a match with each room in the room. Next, Xiao Bian will introduce indoor lighting installation points and indoor lighting collocation techniques.
Indoor lighting installation points
1. The most important thing when installing indoor lighting is that it must be firmly installed, otherwise the safety performance is not guaranteed during the subsequent use.
2. The indoor lamps mainly include wall lamps, table lamps, floor lamps, and other lamps. When the indoor lamps are installed, the height should be less than 24 m and below. The metal shell of the lamp should be grounded so that it can be used safely.
3, bathroom and kitchen lighting, you can use porcelain screw short head. Screw terminal connection should be connected to the center contact terminal, the zero line is connected to the screw terminal.
4, the general with the switch of the lamp, for the sake of safety, the beginning of the handle can not have outcrop metal shell.
5, the installation of flat-top lamps, lamps should be installed according to the requirements. When the weight of the indoor fixture is more than 3kg, use the pre-embedded hook or install the hanger directly from the roof with the expansion bolt. Do not install the fixture with the flat-topped ceiling keel bracket because the load-bearing capacity is limited. If it is forcibly installed, it will be used later. There are security risks.
Indoor lighting matching skills bedroom
The bedroom is mainly soft and comfortable, so instead of using too many light sources, it is best to use natural light. In the arrangement, warm chandeliers can be used as the main body, with a warm wall lamp to create a quiet and comfortable atmosphere.
Indoor lighting matching skills of the living room
The living room is a place where the flow of people is relatively large, so the light must be bright, and it is better to have auxiliary lighting, and the effect will be better when matched with each other. Of course, the most important thing when decorating lamps and lanterns is the harmonization of style.
Indoor lighting matching kitchen
Apart from the installation of smoke-proof ceiling lamps, the kitchen can also be fitted with wall lamps according to the actual situation. Lighting settings can be a little more complicated. In general, the bright lights can tantalize the attractive color of the food, so the lighting of the restaurant usually consists of a main light and one or two auxiliary lights directly above the table.
Editor's summary: On the indoor lighting installation points and indoor lighting collocation techniques introduced here, and hope to be helpful to everyone. If you want to know more about yourself, you can follow the information on this site.
Indoor Modern Lamps Op Lamps Small Lamps Bedroom Lamps Picture Living Room Restaurant Lamps Indoor Lamps
Aluminum Diamond Plate 3003-H22 is easy to fabricate and its raised diamond pattern provides good slip resistance and walking stability.
Application and uses of Aluminum diamond tread plate 3003-H22 bright are: extensive product use as scuff plates, running boards, and mud flaps for fire engines, ambulances, fire trucks, trailers and toolboxes, recreational, and four-wheel-drive vehicles.
Aluminum Diamond Plate
Aluminum Diamond plate sheet
Xiaoxian RuiYi Commercial Trade Co.,Limited , https://www.ryaluplate.com