In the past few years, kitchen and bathroom ceilings were made of aluminum buckles, and now home-use plasterboards have also begun. We can refer to the following standards for the installation and acceptance of them.
Experts reminded that there are acceptance specifications for the acceptance of ceilings for plasterboard and wood plywood. The requirements are as follows:
1, ensure the project
The material, type, specification and ceiling structure of the cover panel and its fixing method must meet the design requirements and relevant national standards. The installation of light steel keel or wood dragon skeleton must comply with the relevant provisions of Chapter II of this standard. Wooden keel, plywood must be fire-retardant treatment in accordance with the relevant regulations. The connection between the cover panel and the keel must be tight and firm. The position of the equipment mouth and lighting fixtures must be symmetrical according to the plates, and the layout is reasonable; the edges of the openings are neat, and the mouth guards are tightly closed. The arrangement is straight, neat and beautiful.
Inspection method: observation, ruler measurement, hand check
2. Basic items
The surface quality of the cover panel should meet the following requirements:
Qualified: smooth surface, correct arching, uniform color, clean, no pollution, no back rust, pitting, hammer marks, no exposed nail caps.
Excellent: smooth surface, accurate arching, uniform color, clean, no pollution, no back rust, pitting, hammer marks, self-tapping screws arranged evenly, no exposed nail cap, no cracking. The quality of seams and beadings of the cover panel shall comply with the following provisions:
Qualified: The seams are even and narrow on the keel, the fillets are straight, there is no warping, smooth and smooth, the joints are tight and there is no leakage. Yin Yang corner side Founder.
Excellent: The seams are evenly distributed on the keel, the fillets are straight, the width is uniform, there is no warping, smoothness, smoothness, tight seams, no leaks, and the yin and yang corners are squared off.
Some modeling requirements should meet the following requirements:
Qualified: The size and position of the model are correct, and the closure is tight and smooth.
Excellent: The size and position of the model are accurate, the closing is smooth, the curve is smooth and beautiful.
Inspection methods: observation, ruler check.
Ceiling installation kitchen ceiling
Yong Yue Medical Technology (Kunshan) Co., Ltd. is a high-tech enterprise integrating R&D, production and sales of insulin safety needles.It has successively won the National High-tech Enterprise and Provincial High-tech Enterprise R&D Center, and passed the three major certifications of ISO, CE and FDA. Our products are exported to more than 100 countries and regions, and our market share in Western European countries has stabilized at more than 15%. It is one of the few professional manufacturers of insulin pen needles 33G production technology.
pen needles for insulin,bd insulin pen needles,insulin pen needles 4mm 32g,32g 4mm needles
Yong Yue Medical Technology(Kunshan) Co.,Ltd , https://www.yongyuecellculture.com