Torque wrench tester is a special equipment for torque wrench and torque screwdriver. It is mainly used for testing various fixed force torque wrenches, digital explicit torque wrench, preset torque wrench, torque screwdriver, screwdriver and various Instruments and products that involve tightening forces. Today Xiao Bian came to tell you about the characteristics of the torque wrench tester, the use of steps and applications.
Torque wrench tester features
1, three kinds of unit conversion
N. m, kgf. Cm, lbf. In (also has a small range of mN.m, gf.cm, mlbf.in);
2, peak hold function
Can grab the peak in the test;
3, automatic shutdown function
Shutdown time (0~9 points) is freely set (0 seconds means no automatic shutdown);
4, gravity acceleration function
It can be set freely (9.000~9.999) depending on the region;
5, comparison function
The upper and lower limit deviations are freely settable, and the alarm indicators are automatically indicated by a traffic light and a buzzer;
6, high sampling and high resolution
Sampling frequency 2000HZ, precision level 1, minimum reading of 0.0001N;
7, three display options
Real-time, peak, automatic peak;
8, the calculation function
Connect to the computer to automatically calculate the maximum, minimum, average, etc. of each test;
9, built-in printer
Can print 1000 sets of stored test data and maximum, minimum, average and so on.
10, automatic peak function
Peak hold time (1~99 seconds) is freely set;
11, sampling point frequency function
10 times/second, 20 times/second, 50 times/second, 100 times/second four free choices;
Torque wrench tester steps
1. Before using the torque wrench tester, check whether the power of the instrument is sufficient. If the power is insufficient, charge it first (can also be used when charging).
2. Place the quadrilateral probe of the test object into the square hole of the tester and use the handle at the other end of the test object above the height adjustment block (if the length is not enough, the whole loading device can be adjusted freely) .
3. Turn on the power switch and the displayed torque value is zero. If it is not zero, press the clear key to clear the torque value.
4, before the test, you need to set the upper and lower limit value, a very small storage value, a very small peak value, automatic peak time, automatic shutdown time, gravity acceleration and so on.
1. Upper limit value setting: The user sets the upper limit value and set it freely according to the need. The upper limit value is the automatic sound and light prompt. The upper limit value is not higher than the full scale.
2. Lower limit value setting: The user sets the lower limit value, and it can be set freely according to the need. The lower limit value is the automatic light prompt, and the lower limit value cannot be higher than the set upper limit value.
3. Very small storage value setting: The user sets a very small storage value according to the storage needs, and data smaller than this value will not be stored.
4. Very small peak hold value setting: According to the peak value, the user needs to set the automatic peak measurement freely, and the data less than this value is not saved by the peak value.
5. Automatic peak time setting: The user can freely set from 1 second to 99 seconds according to the time required for the peak value in the automatic peak measurement state.
6, automatic shutdown time setting: No operation, automatic shutdown time from 0 minutes to 9 minutes can be freely set (when set to 0 minutes, it means to lift the automatic shutdown).
7. Gravity acceleration setting: The user can set the gravity acceleration value according to the location of this area. The default is 9.794.
8. Restore the initial settings: If the user does not operate properly or changes the data several times, you can use this setting to restore the data from 1 to 7 to the factory state.
Torque wrench tester application range
Torque wrench tester has been widely used in electric power, light industry, machinery, engines, internal combustion engines, electric vehicles, motorcycles, automobiles, ships, aircraft and other manufacturing industries and measurement and inspection departments.
The above is the knowledge of the features, use procedures and application scope of the torque wrench tester introduced by Xiaobian. Torque wrench tester is a testing instrument for testing various torque wrenches. It is widely used in electrical manufacturing, machinery manufacturing, automotive light industry and professional scientific research and inspection industries.
The Mobile Module House USES the high-tech compound adopt develop but becomes, is green environmental protection product,MOBILE Module House is use The most advanced, time-saving and labor-saving BBOX module building adopts Aeronautical material New type of Composite Material made of Silicon through 5 years of research and development completed. It has Durability, Physical property , Waterproofness, Abrasion resistance,Fire protection, Blast protection, Chemical corrosion resistance, 7 times stronger than normal concrete,1/5 times lighter than normal concrete,thermal Insulation.
In addition, Mobile Module house Is use BBOX module building Making "box" as basic unit of building, Neo
Prefabricated Prefinished Volumetric Construction (Neo-PPVC) , All moldularized in factory Hoisted on site, Suitable for wide span buildings mm-class deviation, Industrialized production and decoration. 80% of production and decoration completed in factory, then the rest parts are transporte to the site for direct installation complete.
A 204 square metter of the two-storey villa, about a day, four worker can installation complete. The Entire house except water and electricity installation, furniture and appliances need responsible from the customer, the rest of all building, wall, roof, floor, kitchen utensils, such as whole bathroom decorated etc by factory supply, thus greatly reduce customer building time and the cost of hiring workers, At the same time, because it is made of advanced high-tech materials, it is more fire-resistant, anti-explosion, anti-chemical corrosion, waterproof, durability, high temperature resistance, strong sealing and other characteristics than traditional buildings, so its service life can exceed 70 years up, even 100 years or 150 years are no problem.
Therefore, BBOX Mobile module houses have more advantages and competitiveness than traditional houses, and customers will save a lot of trouble when choosing such houses.The villa can be easily built, BBOX can built up to 6 floors, and the interior design can according to the customer requirements customized
BBOX Module houses Delivery time 70days- 90 days, Site installation time 200 square meters 4 workers one day complete.
Mobile Module House
Mobile Module House,Mobile House,Module House,Mobile Module Home
Fuzhou Mei Li Cheng Imp&Exp Co., Ltd , https://www.mlc-solar.com