The plug-in electromagnetic flowmeter has the same measuring principle as the pipeline electromagnetic flowmeter. According to Faraday's electromagnetic induction law, the plug-in electromagnetic flowmeter sensor is mainly composed of a measuring head, an insertion rod, an insertion mechanism and a converter, and can be mounted on a steel pipe. Installed on the cast iron pipe on the cement pipe, the depth of insertion is usually selected at the highest point of the pipe center flow velocity, or the average flow velocity point. The function is to linearly convert the liquid volume flow value flowing into the pipe into an induced potential signal and send this signal to the converter through the transmission line. The converter should be installed not far from the sensor, amplify the signal from the sensor and convert it into a standard electrical signal output proportional to the flow signal for display, accumulation and adjustment control.
The SC-LDEC series of plug-in electromagnetic flowmeters are used to measure the volumetric flow in conductive liquids and slurries in closed conduits. It includes highly corrosive liquids such as acids, bases and salts, and is especially suitable for large-diameter pipe measurements. Plug-in electromagnetic flowmeters are widely used in petroleum, chemical, metallurgy, textile, food, pharmaceutical, paper and other industries as well as environmental protection, municipal management, water conservancy construction and other fields.
Shanghai Automation Instrument Co., Ltd. Plug-in electromagnetic flowmeter technical parameters Instrument accuracy: ± 1.5% measurement value standard, ± 1.0% measurement value special, ± 0.5% measurement value High-precision measurement range: Recommended use range: 0.5m / s ~ 10m /s continuously adjustable maximum use range: 0.2m / s ~ 15m / s continuously adjustable medium temperature: -20 ~ +150 ° C
Ambient temperature: -20 ~ +60 ° C
Caliber: DN350～DN2000
Material: The probe material is 304 stainless steel, the electrode material is 316 stainless steel, and the insulation layer is PTFE.
Power supply: 220VAC 50HZ, 24VDC
Http://news.chinawj.com.cn
Description about disposable Nitrile Medical Gloves
Material for medical gloves: Nitrile, it is very good use and thick enough
Packing for medical gloves:100pcs/box, 1000pcs/carton, carton size:35x27x25cm
Weight:5.5kgs
There are different colors and sizes for option, we have the color like white, blue, pink, red, black etc.
We supply the medical used gloves and home use disposable gloves, there are different material for the gloves, like PVC, Rubber, Nitrile.
For medical use, the disposable nitrile medical gloves are very suitable and good use, it could be used in hospital, with the standard ASTM D6319, EN455/EN374.
If you need more information, pls contact us at any time, thanks a lot
Medical Gloves
Medicine Gloves,Sterile Medical Gloves,Medical Rubber Gloves,Medical Hand Gloves
Dongguan Smart Furniture Co.,Ltd , https://www.smtfurniture.com