ã€Vacuum pump is a vacuum pump in various ways in a closed space to produce, improve and maintain the vacuum device. A vacuum pump can be defined as a device or device that uses a mechanical, physical, chemical or physico-chemical method to evacuate a drawn vessel to obtain a vacuum. Any use of mechanical movement (rotation or sliding) to obtain a vacuum pump, known as the mechanical vacuum pump. Mechanical vacuum pump demolition should pay attention to what matters? Xiaobian together today to understand it! Mechanical vacuum pump demolition considerations Mechanical vacuum pump demolition considerations 1, disassembly, cleaning machinery Vacuum pump should be clean room please. When washable, should pay attention to the original assembly position of each component, the side and the combination of elastic, at the same time make a record, so as not to misinstall; 2, remove the rotary plate and the rotor, we must pay attention to hand tighten the rotary plate, because the rotary plate Greater by the spring force, accidentally easy to fly off, bump edges or surface damage can not continue to use. 3, removed the parts should be separated, properly handled, so as not to touch each other or lost. 4, the assembly, should be the first part of the surface of the rotating parts coated with a small amount of vacuum pump oil for lubrication. Pay attention to clean, no iron filings, silt and dust fall into the vacuum pump. Installed vacuum pump should be easy to move, no unevenness and block phenomenon. 5, after the final assembly, add vacuum pump oil from the oil hole until the oil standard line. 6, before starting, should be injected into the exhaust port a small amount of vacuum pump oil, so that the vacuum pump is fully lubricated. (Reassembled the vacuum pump should be a few hours of operation test to observe whether to meet the requirements) (Editor: Li Juan QQ: 2355962925) Recommended reading: Acting Procurement 2016 Xiamen 98 CIFIT