Each product has its own precautions, which can reduce damage and can be used for a long time. So you know what are the precautions for plastic crushers? No need to worry, Advance Plastic Machinery Factory provides you with.
First, the plastic crusher and power unit should be installed firmly. If the plastic crusher is required to be fixed for a long time, it should be fixed on the cement foundation; if the plastic crusher is required to flow, the unit should be installed on the base made of angle iron and ensure the power machine (diesel or electric motor) and plastic. The pulley groove of the crusher is in the same plane of rotation.
Second, after the plastic crusher is installed, check the fastening condition of each fastener. If it is loose, it should be tightened. Also check that the belt tightness is appropriate.
3. Before starting the plastic crusher, first turn the rotor by hand to check whether the teeth, hammer and rotor are flexible and reliable. Whether there is collision in the crushing chamber, whether the direction of rotation of the rotor is consistent with the direction indicated by the arrow, the power machine and Whether the plastic crusher is well lubricated.
Fourth, do not change the pulleys casually, in case the rotation speed is too high, causing the explosion chamber to explode, or the rotation speed is too low, which affects the working efficiency of the crusher.
5. After the plastic crusher is started, it should be kept idle for 2-3 minutes. After no abnormal phenomenon, it should be put into operation.
Sixth, work should pay attention to the operation of the plastic crusher at all times. First, the feeding should be uniform to prevent the crushing of the crushing chamber; secondly, do not overload the work for a long time. If any vibration, noise, bearing and body temperature are too high, and the material is sprayed outward, stop the machine immediately and check it out.
Fruit Bags,Mesh Bags,Vegetable Bags
Metal Wire,Fence,Wire Mesh Co., Ltd. , http://www.nsmeshmetals.com