1. What is the passstone?
Can be said to be a kind of stone threshold, used to solve the internal and external elevation, solve the transition of the two materials to transfer, block the water, play a beautiful stone and other functions.
2. Function
Due to the different material practices in different rooms, the ground thickness is different, resulting in a height difference, and some materials do not make a good transition. For example, in the living room or walkway, the floor is reinforced with laminate flooring, and the thickness is about 12 to 15 (8 thick floor + 5 thick floor mats), and the bathroom floor is tiled, with the thickness of the cement mortar + the thickness of the tile + the thickness of the slope of the ground water, etc. After completion, it is much higher than the floor. At the same time, the bathroom should consider that a small amount of normal water should not flow out to damage the floor. In this way, “passing the door stone†is one of the commonly used solutions.
3. The height of the door stone?
It is recommended that the door stone be slightly higher than the bathroom floor by 5 to 10 mm. Slightly blocking the flow of water can be, while taking into account the beauty and reduce defects, the third is the bathroom door is the highest point of the slope, the water should be very little.
On the low side, passing the stone above the ground should not be more than 20 mm. This is similar to the above reason, taking into account the beauty and convenience. Third, the standard stone thickness is usually around 18 to 20.
Too high height difference, you can choose to thicken another custom stone. Pay attention to whether there are elderly or disabled people in the home.
4. Material selection
The corners of the stone are usually "chamfered", that is, grinding a hypotenuse, also for the sake of beauty and convenience. Stones are recommended to use granite. Granite is harder than marble and resistant to treading. If one side of the ground (usually the outside of the bathroom) has a stone floor mosaic or stone floor circle line, can also be used similar or the same material, look better. The common cheap, solid and well-matched stone is Fengzheng black, Jinan green, sesame ash and so on.
5. Installation notice
In installation, cement mortar is usually used to lay the door stone. After passing through the gate stone for a certain period of time, there will be cracks in the surrounding cement mortar. Therefore, it is recommended that when laying cement mortar, the ground on the side of the bathroom will be left as a gap, which is roughly controlled to be about 5 mm wide. After the interior is filled with cement mortar, the surface is slightly lower and concave. After construction, the construction adhesive or silicone is used. Glue (the material that the fixture is also used for) is lapped so that even if there is a crack in the cement mortar and the door stone is removed, when water is present, the water will not penetrate the gap.
Building Materials Knowledge Construction Acceptance Nature Floor Cement Marble Room Floor Tiles Marble Tiles Bathroom Tiles Color Bathroom Tiles Bathroom Door Tiles Tile Floor Tiles ld Tiles
Materials for BBQ Grill Netting: Stainless Steel Wire, low carbon galvanized wire.
Characteristic of BBQ Wire Netting: heat resisting, corrosion resisting, nonpoisonous, tasteless and convenient for handling. It has a fixed shape and can be used to roast flour food and meat. The shape can be round, square, curve and so on.
Applications of Barbecue Grill Mesh: Mostly used in roasting of meat, fish and wheat flour food in the outdoors.
Barbecue Wire Netting
Barbecue Wire Netting,Bbq Grill Mesh,Bbq Wire Mesh,Barbecue Grill Mesh
Hebei Jiebin Wire Mesh Products Co.,Ltd. , http://www.wiremeshjb.com