In addition, the content of volatile components in the finishing agent should be appropriate

A variety of natural wax synthetic wax cationic surfactant non-ionic surfactants and other raw materials for the preparation of stable emulsifying wax. The influencing factors for the preparation of emulsifying waxes are discussed, such as the choice of surfactant temperature and stirring speed. The emulsifying wax was applied in the leather finishing agent to obtain better results. Emulsifying wax emulsifier emulsifier middle ring No. One paraffin wax is an important raw material needed by various industries in China. It has a wide range of uses in light industry, chemical and papermaking construction and other industries. The best form of paraffin wax in use is emulsifying wax, which is an aqueous, waxy, homogeneous fluid. Emulsifying wax is also an important finishing material and it is widely used in sub-leather industry. It has fine emulsion particles, good film formation, and high transparency of the film. Finishing with leather can significantly improve and improve leather performance, bringing fresh technical vitality to the leather industry, improving product quality, and enhancing the competitiveness of the market. The leather finishing experiment proved to have a good overall performance. Experimental Raw Material Paraffin Wax Nonionic Surfactant Cationic Surfactant Filming Aid. Production Process Additives Temple Paraffin Ten Surfactant Emulsification Blending Filtration Dispersion Products Paraffin and surfactant plus a small amount of water, slowly warming up under stirring, forming the first emulsion, continue to add water. Through experiments, it is found that multi-component emulsifiers produce products that are not ideal. We have carried out experiments on the amount of emulsifiers, with less emulsifiers and more emulsifiers. The product has more foam and affects its quality. The amount of emulsifier is generally good. The effect of the emulsification temperature is that the process conditions are the emulsification time stirring speed. When the emulsification temperature is lower, the product performance is poor, and there may be delamination. Effect of emulsification time Under the same conditions of emulsification temperature stirring speed, the effect of emulsification time on product performance was tested and it was learned from the experiment that when the emulsification time is less than that, the product performance is poor, and the product has obvious delamination at the time. When the product has a little oily substance analysis, the emulsification time should be the best choice. The effect of stirring speed is a lot of experiments on emulsification temperature emulsification time under the same conditions and the stirring speed. It is known from the experiment that when the stirring speed is under the product there is delamination phenomenon, the product is not delaminated at that time, but after storage days will be Stratification occurs, so it was learned through experiments that the preferred stirring speed should be in the emulsifying wax in the leather finishing agent. The ingredient that plays a major role in the leather finishing agent is the particle size of the emulsifying wax and the polymer film forming material, which is also an effect on the coating. The main factor of the effect.