Sanitary Ware Cleaning and Maintenance Guide

Toilet bowl

Tools: brush, sponge, neutral detergent.

The key: the water stop rubber should also be cleaned.

The toilet can be cleaned with a brush or sponge sold on the market, with a mild detergent or cold water or warm water. Pay special attention to the edge of the water ring and the drain below the water seal when cleaning, because these two places are the most vulnerable to dirt in the toilet. When the toilet lid is dirty, wipe it with a cloth neutral detergent. Never use gasoline, loose perfume volatile liquid, acidic solvent or hot water to wipe the toilet lid.

Another method is to replace the neutral detergent with vinegar, then wipe the water, so that it can be repeated several times.

For the water stop rubber of the toilet inlet valve, it is easy to age and fail in places where the water quality is not good, so it must be taken out and cleaned frequently.

Smart bathroom

Tools: special cleaner (non-corrosive), sponge (soft cloth is also available).

Key: The electronic eye should be washed away with water.

The "worth" of the smart bathroom is much higher than that of the ordinary bathroom. The maintenance method is naturally very particular, and it is sloppy.

Before using the cleaning agent, be sure to try it out before the product is noticed, and confirm that it has no bad damage before applying it to the entire product. Immediately after using the cleaner, wipe the surface of the product clean and leave the cleaner on the surface.

It is best to avoid cleaning the electronic eye with water and prevent unnecessary troubles such as wet circuit of the induction circuit board or short circuit of the circuit.

In the process of using the product, if it is still not working properly according to the instructions for use, you should contact your local agent or manufacturer for professional repair in time, and avoid accidental damage caused by your own repair.

Jacuzzi

Tool: Granular detergent.

Key: Avoid using cleaners for tile or enamel surfaces and do not allow detergent to enter the circulation system.

Use a granular detergent that mixes with water to clean the jacuzzi and avoid using detergents for tile or enamel surfaces. Do not leave the container containing the liquid detergent on the surface of the bathtub for a long time. Do not use sprays or concentrates or other similar cleaning products. Also, do not allow nail polish, nail polish, dry liquid cleaner, acetone, paint remover or other solvents to come into contact with the acrylic surface. Corrosive cleaning agents can cause damage on acrylic surfaces. Care should be taken to thoroughly clean the acrylic surface after each use and do not allow detergent to enter the circulation system.

General trick

The cleaning of the bathroom should first be ventilated. When using the bathroom, turn on the ventilation fan. When not using the bathroom, open the door of the bathroom. After bathing, the ventilation fan and the bathroom door should be opened at the same time to remove the water vapor more quickly. The bathroom that is often not ventilated will cause condensation, moisture on the wall, mold, and black spots on the faucet.

Stevia Tablets

Stevia Tablets,High Quality Stevia Tablets,Stevia Tablets Details, CN

JINING USP INTERNATIONAL CO.,LTD. , https://www.uspintl.com

Posted on