In recent years, the wooden door home market is mixed, and poor quality wooden doors with poor quality, rough production and serious defects often enter the market, making it difficult for consumers to distinguish between fake and inferior. Generally, the inferior furniture generally has the following serious defects. Consumers should pay attention to the identification when purchasing wooden doors:
Material trap
When consumers buy wooden doors, there is no obvious difference in the appearance of the wooden doors. But why are the prices far apart?
In fact, there is a big difference in the production materials used in wooden doors. Some manufacturers have many traps in the production of furniture, such as cutting corners and stealing beams, which need to be carefully identified to be seen.
Use inferior substrate
The use of substrates that are not dried and worm-like, such furniture has a high moisture content, which can easily cause deformation or cracking after the finished furniture. Furniture made from decaying or worm-eaten wood can seriously collapse furniture.
Substrate mixing assembly
Since the wood-based panel furniture adopts the method of veneer decoration on the outside of the substrate, although the parts of the furniture cabinet have the same appearance, some of the substrates in the furniture are moved by the manufacturer. For example, some furniture cabinet front and door use melamine board that meets environmental protection and quality requirements, while the back panel of the cabinet uses large core board with more formaldehyde emission.
Internal production cut corners
Since the wood-based panels used in the panel wooden doors are all made of adhesive bonding and are very sensitive to water, their waterproof performance must be ensured by the veneering and edge sealing treatment of the panels. In order to save costs, some manufacturers do not seal the joint between the inner panel and the board of the furniture. On the one hand, the furniture is broken by water, and the formaldehyde in the material can not be fully blocked, which causes the furniture to have a heavy formaldehyde smell.
Hardware is replaced
Replace cheap hardware and cut corners in furniture installation. For example, the counter mirror of a large closet has no back panel, no beading, and is only positioned with a nail. This practice of cutting corners and cutting materials can easily cause the mirror of the counter to be broken.
When purchasing a series of furniture such as wooden doors, you should carefully observe the furniture samples, and ask the purchase lady to ask about the material type and brand. When signing a furniture purchase contract, the sales personnel are required to indicate the contents according to their introduction. Don't replace the color, type or simple words of the furniture with the words "consistent with the factory samples", so that the signing of the contract is binding, so that the inferior furniture manufacturers have no chance.
Faucet Connector,Cnc Faucet Connector,Brass Cnc Connector,Curving Connector
Jiangmen Xinhui Yilin Co.,Ltd , https://www.ylseiko.com