How to check the quality of ceiling installation acceptance

At present, there are two kinds of suspended ceilings and integrated ceilings in the ceiling of home decoration. The construction steps are basically the same: 1. The ceiling material is ready to measure and mark ceiling ceilings; 2. The wood keel and light steel keel are installed; 3. Out of wood ceiling modeling; 4, ceiling closure.

What are the specifications of the keel installation?

Keel installations have strict specifications. The distance between booms is specified to be 300-1200mm. Arches are erected from 1% to 3% of the span of the room; the distance between the main keel is 600-900mm; the distance between the auxiliary keels is not more than 600mm. When the householder enters the construction site, he can bring his own tape measure and check the installation of the keel according to the design drawings. This will prevent some construction teams from installing materials in violation of regulations in order to save materials.

Wooden ceiling installation: Most of the suspended ceiling frames are assembled using wood keel and plywood. The first sheet is glued and fixed, and then the model is installed. Finally, the corners are repaired.

Note: The boards used in the wooden ceiling are basically plywood, and different sizes of plywood are used in different places. In the main part of the wooden suspended ceiling, plywood with a thickness of 5 mm or 9 mm is generally used; a 5 mm plywood can be used for the auxiliary part and the arc; a more elastic 3 mm plywood is used for the arc repair position. The head of the household to the site, in addition to the size of the sheet, you can also observe whether the brand printed on the surface of the brand information.

Integrated ceiling installation: Install the light steel keel or install the wooden ceiling frame, install the gypsum board or aluminum buckle board on the surface.

Note: When installing the pinch plate, it should be noted that the mounting is firm and the distance between the plate and the plate must be appropriate. At the construction site, the head of household can check whether the buckle board is firm; the number of nails in the marking box is not less than 12; the gap between adjacent buckle boards is 2-3mm.

Decoration materials knowledge living room ceiling family decoration room decoration design

Barbecue Wire Mesh


The Barbecue Wire Mesh other name is BBQ Wire Mesh. Be made by Stainless Steel Wire and medium carbon Steel Wire welded or weave to done. 

The surface treatment : chrome, nickel, galvanized or polishing .

It is including: round flat/concave Barbecue Wire Mesh, square flat / concave Barbecue Wire Mesh , hemming Barbecue Wire Mesh, welded/weave Barbecue Wire Mesh, stainless steel Barbecue Wire Mesh .

The Barbecue Wire Mesh be maindly used for restaurant , BBQ shop, cookout, camp, military, travel and other activities's barbecue, steam or smoked about pasta, meat or fish.


The advantages of Barbecue Wire Mesh :

High temperatures

non-deformation

anti-rust

non-toxic and tasteless

easy to use


barbecure wire mesh


Barbecue Wire Mesh

Barbecue Wire Mesh,BBQ Wire Mesh,Folding BBQ Mesh,Welded BBQ Mesh

ANPING COUNTY SHANGCHEN WIREMESH PRODUCTS CO.,LTD , https://www.scfiltermesh.com

Posted on