[China Aluminum Network] aluminum honeycomb panel is mainly selected high-quality 3003H24 alloy aluminum or 5052AH14 high manganese alloy aluminum substrate, the panel thickness of 0.8 ~ 1.5mm fluorocarbon roller-coated or color light paint, color light paint in scratch resistance Traces, acid rain, corrosion and discoloration, self-cleaning are stronger than PVDF, floor thickness is 0.6~1.0mm, total thickness is 25mm.
The core material is hexagonal type 3003 aluminum honeycomb core, the thickness of the aluminum foil is 0.04~0.06mm, and the side length is 5~6mm. The roll forming skill is used to complete the forming of the front and back skins, the automatic machine equipment is folded and the front and back skins are in the device. Closely bite. All the processing processes are completed at the modern factory, and the hot-press molding technology is selected. Due to the high heat conduction value between the aluminum skin and the honeycomb, the thermal expansion and contraction of the inner and outer aluminum skins are synchronized; the honeycomb aluminum skin has small holes to make the gas in the plate free. Flow; Sliding device buckle system will not cause structural deformation during thermal expansion and contraction, and thus can guarantee a very high degree of flatness. Use adhesive adhesive: two-component polyurethane high-temperature curing adhesive, with automatic honeycomb composite production equipment after adding Pressed high temperature compounded, overcoming the fragility of the past honeycomb panel adhesive layer. The inner layer is a special hexagonal aluminum honeycomb formed of an aluminum alloy whose hardness reaches H19. As a core plate adhered to the sandwich structure, it is subjected to pressure in the tangential direction.
Aluminium Tread Sheet structure of new, non-slip effect. Light weight, excellent durability. The quality of about 7kg per square meter, the tensile strength of 200N per square millimeter, aluminum extension of high relative elongation higher than 10%, can withstand high bending without breaking, good toughness.
|
Alloy series |
Typical alloys |
Material status |
thickness(mm) |
width(mm) |
length(mm) |
|
1 series |
1060 |
H*2.H*4.T4.T6 |
0.8-7.0 |
300-2000 |
800-6000 |
|
3 series |
3003 |
||||
|
5 series |
5052.5754 |
||||
|
6 series |
6061.6063.6082 |
Aluminium Tread Plate,Tread Plate Embossed Aluminium,Precision Aluminum Tread Plate,Tread Aluminum Alloy Plate
La Ya Aluminium products Co.,Ltd. , https://www.layametal.com