Shower curtain installation tips fresh and dry bathroom space

The bathroom is not to say that the bigger the better, the full use of bathroom space is very important, then the shower room is a good choice, it is not only beautiful and can effectively separate the wet and dry bathroom. But to make room for a shower in the bathroom is a very troublesome thing, then I think the shower curtain should be your backup choice. Xiaobian Xiaobian introduces you to the installation skills of the shower curtain. If you need it, you can pay attention!

First, the shower area is best to have walls on three sides. More importantly, the shower curtain rods are placed on the walls at both ends with a "bulging rod". What is the expansion rod? The "expansion rod" is a telescopic iron tube. After the two sides of the head, it is fixed by a screw. The maximum load-bearing capacity of the "expansion rod" is generally 20 kg, which can be used for bath towels, and the "expansion rod" can be displaced and replaced anytime and anywhere, which is very convenient;

Second, if the shower area has only two walls, the shower curtain rod can only choose the arc steel tube fixed on the wall. This fixed arc steel tube has a drawback because it is uneven due to uneven force. Loose.

Third, the natural stone retaining strip width generally has three sizes: 3 cm, 5 cm and 6 cm, 5 cm for small series; high generally has two sizes, 1 cm and 1.8 cm, 1.8 cm for small series; Some people like to install the water retaining strips upright. In fact, it is not necessary. The height of 1.8 cm is enough. If the water surface reaches 1.8 cm, the floor drain has not been discharged. This is not a problem of water retaining strips, but a problem of floor drains.

4. If the water-blocking strip is installed after the floor tile is installed, the glass glue that fixes the water-blocking strip needs 24 hours to be silicified. The responsible workers will advise you not to let the glass glue water in 48 hours. Psychological preparation for not taking a bath for two days.

Coal Activated Carbon For Gas Purification


Gas purification using coal-activated carbon for chemical raw gas, chemical synthesis gas, pharmaceutical industrial gases, beverages with carbon dioxide gas and hydrogen, nitrogen, ozone, ethyl hydrocarbon, ethane, butane, cracking gas, inert gases, such as purification and atomic installation of exhaust gas purification. Also used to remove contaminants in the air, as well as separation and purification of mixed gases. can also be used for gas masks and protective equipment disinfection and filtration.

Use: Used in the purification, seperation and refining of chemical raw material gas, chemical synthesis gas, pharmaceutical use gas, carbon dioxide for drinks, hydrogen, nitrogen, inert gases etc.

Spec.:

Model NO.
Moisture(%)
Strength(%)
Ash(%)
Carbon tetrachloride(%)
Packing density(g/L)
Grain diameter(mm)
ZK-2050
≤3
≥95
≤8
≥50
580±20
Φ2.0
ZK-2060
≤3
≥95
≤10
≥60
530±20
Φ2.0
ZK-2070
≤3
≥95
≤10
≥70
510±20
Φ2.0
ZK-3050
≤3
≥95
≤10
≥50
540±20
Φ3.0
ZK-3060
≤3
≥95
≤10
≥60
510±20
Φ3.0
ZK-3070
≤3
≥95
≤12
≥70
500±20
Φ3.0
ZK-3080
≤3
≥95
≤12
≥80
460±20
Φ3.0
ZK-4050
≤3
≥95
≤10
≥50
530±20
Φ4.0
ZK-4060
≤3
≥95
≤10
≥60
510±20
Φ4.0
ZK-4070
≤3
≥95
≤10
≥70
490±20
Φ4.0
ZK-5060
≤3
≥95
≤10
≥60
500±20
Φ5.0

Coal Activated Carbon For Gas Purification

Coal Activated Carbon For Gas Purification,Coal Activated Carbon,Gas Purification Coal Activated Carbon,Coal Based Powder Activated Carbon

SHIZUISHAN ZhongShi activated carbon co,.ltd , https://www.zscarbonchina.com

Posted on