1, the difference between the price of <br> <br> regular LCD screen splicing and LCD monitors in the price there is a certain gap, the General Assembly adopted a multi-screen mosaic professional metal casing, the new A + Industrial LCD screen, professional monitoring motherboard drivers, so the cost On the display much higher than the display, now on the market a lot of low-cost LCD splicing screen, in fact, the display is modified, basically you can say is that the monitor changes the shell, and may even use the old screen, please the majority of engineering companies, dealers procurement The teacher noticed the difference.
2, the difference between the liquid crystal panel on a scale from <br> <br> LCD screen, a liquid crystal display screen is used in civil, and regular LCD screen splicing is used in high luminance LCD industrial grade A +, backlight requirements To be higher than the display, so when the LCD display will appear on the display, and can not achieve a good image.
3, the viewing angle difference <br> <br> mosaic screen LCD viewing angle may reach 178 degrees, while the average direction of the liquid crystal display 178 degrees can only see a blank. This is a very important criterion for identifying liquid crystal splicing screens and liquid crystal displays. There is the difference between the two input signals, the splicing screen is mainly input video signals, in order to meet the interface requirements of different front-end devices, so the splicing screen interface will be much richer than the display, there are BNC, VGA, RGB, HDMI, DVI, S Terminals and other interfaces to meet the input requirements of different signals, and the main display input VGA signal, the interface is mainly VGA, S-terminal, etc., can not meet the signal input requirements of various monitoring equipment.
4, the difference between driving scheme <br> <br> program is displayed is not the same motherboard, the motherboard mosaic screen main drive moving image processing better aspect, since the liquid crystal display start time is generally no more than 8 hours, with the The civilian-level display board, and the LCD splicing screen will bear the workload of 24 hours a day for 365 days. Therefore, a professional monitor board must be used to ensure high brightness, high contrast, high resolution, etc., thereby reducing the use of the screen. loss. If the ordinary display is used for a long time, its brightness and contrast will drop rapidly, which will affect its service life. This is why most LCD monitors can normally display images after the project has just been debugged. However, after a period of continuous power on, some screens may appear dark.
Hydrofoil surfboard is like a hydrofoil boat where there is a wing-like structure underwater that, at speed, lifts the hull above water.The aluminium design is affordable, robust and stable.
This technology has entered the world of Stand Up Paddle boarding with the hydrofoil. The foil insert into the fin box of the bottom of the board, and once you hit a certain speed, either on a wave, from paddling, or once enough wind gets trapped under your board, the foil will lift the board and the rider above the water, providing the rider with a flying sensation.
Foil For Surfboard Sup,Carbon Fiber Hydrofoil,Hydrofoil Carbon Foil,Carbon Hydrofoil Surfboard,Carbon Hydrofoil Board,Hydrofoil Surfboard Foils
Huizhou Melors Plastic Products Factory , https://www.melorsfoam.com