Spray gun repair method:
1. All (spray guns) should be thoroughly cleaned after use, especially with 2K two-component paint. Avoid any type of paint staying in the gun pot to avoid blockage after drying.
Second, it is recommended to remove the hood and nozzle after each use and thoroughly clean it.
3. Avoid immersing the spray gun in the solvent for a long time to avoid damage to the gasket inside the gun.
Standard distance (air gun) and air pressure:
1, the standard distance of the spray gun is 20cm;
2, (spray gun) to maintain 3 kg of air pressure during operation. (refers to the air pressure at the (gun) interface.
we have an abundant strength on technology,research and development capabilities, high quality on product,and good reputation in the markets,prossessing an autonomous regional-level industry technology center and a advanced complete product testing center. The quality testing center,owning a MXF-2400 fluorescence spectrophotometer,a WFX-110 atomic absorption spectrophotometer, a UV-9200 ultraviolet and visible spectrophotometer and a HIR-944 high frequency infrared ray carbon sulhur analyser etc analysis test equipment,these devices can fast accurate analysis of all kinds of chemical composition of alloy,the center has 10 professional analyst, the analyst has a higher level of analysis,the good theoretical basis, the escort for the company's product quality,and won the praise of users.
Silicon Barium Alloy (Low Barium)
Silicon Barium Alloy,Metallic Silicon Lump,Silicon Aluminium Lump,Calcium Silicon Lump
NINGXIA HELANSHAN METALLURGY CO., LTD. , http://www.nxhlsyjferrosilicon.com