Tiles are one of the most commonly used decorative materials in homes. Fashionable people also like to use tiles of different sizes, styles and colors, and combine them in a certain way to splicing out various patterns. However, there are still many problems in tile paving, especially the problem of empty tiles, cracking and bricks, which can directly affect the decorative effect and even threaten personal safety. Although tile adhesive can effectively solve these problems, the use of tile adhesive tiling is also required by the specification.
Be sure to deal with the base before tiling:
1. All surfaces should be solid, clean, free of empty drums, free of oil, wax, mold release agents and other loose materials;
2, the painted surface should be rough, at least 80% of the original surface;
3. After the concrete surface is completed, it should be cured for at least 28 days before laying bricks;
4. The surface of the new plaster should be cured for at least 7 days before laying bricks;
5. Old concrete and plastered surfaces can be cleaned with industrial detergents or degreasers and then rinsed with a high pressure faucet. The surface can be paved after drying for 24 hours;
6. In a substrate with a high water absorption rate or in a high temperature, dry environment, the base surface must be wetted before application.
Read the product instructions carefully:
1. Understand the applicable range of this type of tile adhesive, which is suitable for which types of bricks are laid.
2. Please mix and mix the tile adhesive with water according to the ratio, and stir with electric mixer.
2. After mixing, the tile adhesive should be used up within the specified time. Do not use water for reuse.
3. Use under suitable climatic conditions to avoid high temperature and low temperature construction.
4. Select the special tooth type scraper construction for the tile glue. The small brick can be scraped with a small tooth mark and vice versa.
5. If the back of the tile is deeper or the stone or tile is larger and heavier, the glue should be applied on both the working surface and the back of the tile.
6. Pay attention to the expansion joints, and leave the seams to help remove the air, improve the filling rate of the tiles, and reduce the cracking of the hollow drums and tiles.
7, the order of tile paste, should be laid from the bottom up, you can adjust the tile spacing according to the actual area.
Thin paste method:
Suzhou Newstar Hardware Co.,Ltd is China manufacture and supplier of wholesale Tool Bag, personalized tool bag, and we are specialized in tool pouch bag, power tool bag, etc. We are strong at customized services, OEM and ODM with customer logo, needs and different requirements. Long time use, and good quality. Our tool bag has sold to many countries and good feedback, we are happy to be your long time friends in tools industry.
Wholesale Tool Bag,Personalized Tool Bag,Tool Pouch Bag,Power Tool Bag
SUZHOU NEWSTAR HARDWARE CO.,LTD. , https://www.hardwarenewstar.com