You can first wipe the cooktop with the cut inner skin of the potatoes, and wipe the rag with hot water. Or use radish or cucumber crumbs to rub with a proper amount of detergent, wash with hot water, the effect is very good.
Pour the right amount of detergent on the cooktop, then wipe it evenly with a radish head, then dry it with a rag. This way you will see the stove bright and new. You can also slice cucumber or carrot, but white radish works best!
Mix 30 grams of baking soda (sodium bicarbonate) with 500 ml of hot water, wipe with a rag or sponge, and easily remove the stove oil.
Use two teaspoons of white vinegar with 200 ml of warm water, then rinse with a rag or sponge vinegar, so that the stove that is wiped out can be completely renewed.
The three-in-one toothpaste, brush and candle that are commonly used in life are easy to remove.
The coarse salt used in pickles can't be let go. It can also easily smash the oil on the stainless steel cooktop and the glass cooktop, but after cleaning it, be sure to clean it up, otherwise the cooktop will be black. It is.
Spread the sticky rice soup evenly on the cooktop. After a period of air drying, scrape off with a small shovel and the oil will fall off.
Eat the remaining lemon or orange peel and put it into the water to boil. After cooling, use a rag to draw a certain amount to wipe. The effect is also good. It can remove the oil stain under many years of deposition.
After cooking the noodle soup, let it cool, then use a rag to pick it up and wipe it, and the oil will be eliminated.
Gas stove maintenance can't be cleaned when it is very dirty, and it should be cleaned and maintained every day. In particular, it is necessary to check and clean the gas stove hose frequently. If there is aging, cracking, scorching, and bite marks, the mouse bite should be replaced immediately.
[Scan the QR code below, pay attention to the WeChat public number "Jiuzhen cabinet network "; you can view the popular article " Selling cabinets, complaining that if it works, I have already made a fortune!" ", want to communicate with peers can join the Jiuzheng building materials network cabinet exchange group]
PP plastic, polypropylene, commonly known as "baijiao",Scientific name: polypropylene.
Description:
PP Plastic is a kind of semi crystalline material. It is more hard than PE and has a higher melting point. Due to the high crystallinity, the surface of the material stiffness and resistance to scratch characteristics very well. PP Plastic don't have the problem of environmental stress cracking.Polypropylene (PP Plastic) is a semi-crystalline thermoplastic.PP Plastichas high impact resistance, strong mechanical properties, resistance to many organic solvents and acid and alkali corrosion.
PP Plastic is widely used in industry and is one of the most common polymer materials.
Australian COINS are also made of polypropylene.
Polypropylene bonding:
K-720 is suitable for polypropylene PP plastic adhesion, suitable for large area plate lamination, high transparency, suitable for PP adhesion PP, PP adhesive PC, PP adhesive ABS,PP adhesive PVC, PP adhesive acrylic, PP sticky metal, PP stick wood.
K-7007 adhesion performance is roughly the same as k-720, light yellow and more economical.
K-620 is adhesive small area polypropylene PP glue, must be used with the k-650 treatment agent, the instant positioning, the strength is high.
Advantages:
1. Low density;
2. Heat resistance ;
3. Non deformation;
4. High stiffness;
5. High surface strength;
6. Good chemical stability;
7. Nontoxic and safe.
Disadvantage:
The main disadvantage of the fault polypropylene is that the high temperature rigidity is not enough, and the low temperature is brittle.
Poor environmental tolerance, outdoor use, easy to turn yellow and brittle.
Tensile strength of anisotropy, the products are easy to deform, continuous use of low temperature, high creep performance, and long - term load.
Poor printing performance.
Application:
1,Valve part, drinking water and sewage water pipe,
2,Sealing element, spraying carrier,
3,Corrosion-resistant trough and barrel, industrial applications that have acid and alkali-resistant requirement; wastewater and gas discharge equipment for industrial purpose,
4,Scrubbing tower, clean room, semiconductor plant and other related industrial equipment and machinery, food machinery and chopping board,
5,Electroplating process, toy part
Combustion characteristics: PP Plastic easy to burn, polypropylene from continue to burn after the fire, with the top of the flame is yellow, the bottom made in blue, with a small amount of smoke generated, burning melt dripping, and oil.
Specification: the thickness of PP sheet material can be produced from 0.3mm to 2mm, and the PP sheet material is of rolling material and width of 500-1000mm.
The thickness of the plate can be produced from 2mm to 200mm. The specification is 600*1200mm 1000*1000mm 1000* 2000mm. Other specifications can be customized as needed,and The diameter of the PP rod can be produced from 2mm to 250mm, the length is 1 meter, PP rod can be ordered to be more than 3 meters in length.
Color: white and black, other colors can be customized
Modified varieties: PP sheet have various enhancers and other auxiliaries can be added to make modified varieties, depending on the requirements
Storage methods:
Keep in tight, cool and dry place to ensure good ventilation
Product certification: most environmental certification reports and safety reports for raw materials, such as SGS report, CTI report, UL report, MSDS safety information, etc.
Pp Plastic Rod,Polypropylene Plastic Rod,Extruded Polypropylene Plastic Rod,Pp Plastic Welding Rods
Dongguan Noegem Plastic Products Co.,Ltd , http://www.noegempLastic.com