Tiles are one of the necessary materials in the renovation of the building, so the sales of tiles on the market will be relatively high, but many consumers buy tiles when making choices. Due to the large number of tile brands in the market, it is not known which brand to purchase. It is more reliable to personally choose Jiajiang tiles because it is the second largest tile production base in the country except Guangdong. Here we come to the specific understanding of the Jiajiang tile paving steps method, as well as the selection of Jiajiang tile Raiders related content. 
How about Jiajiang tile
Step 1: Generally, before the construction of the tile, we all need to do a simple cleaning of the tile, and then put it in water and soak for more than 2 hours. The main purpose is to allow the tiles to fully absorb enough moisture to avoid drawing water from the material after the tile is finished, resulting in insufficient moisture of the adhesive and affecting the firmness of adhesion, resulting in emptying and falling off. After the tiles are fully submerged and before they are laid, remove the surface water from the water and wipe off the surface moisture to allow the tiles to be laid. Before starting to lay the tile, suspend the line on the wall-leveling layer. Used to determine the size of the tile wall, and then set the horizontal line, so that you can ensure that the tile to maintain horizontal and vertical flat surface. 
Step 2: We need to align the horizontal lines when we are laying the tiles. This will effectively allow the tiles to support the wood and prevent the tiles from displacing or falling before reaching the adhesion strength. The tiles of Jiajiang tiles generally start from the edge of windows and doors, from top to bottom, and proceed from left to right. The specific paving method is as follows: The water leveling layer is used first. Then use a spatula to put the mortar on the back of the tile, then put the tile on the wall, and then use a shovel handle or a rubber hammer to tap the tile, so that the mortar fills the space between the wall and the tile.
Step 3: After the padding of Jiajiang tiles is completed, we need to clean up the surface dirt as soon as possible. Next, we will learn some methods for cleaning and maintenance. In the case of serious contamination on the surface, in particular when it is contaminated with hard-to-remove stains, it can be wiped with a 10% strength dilute hydrochloric acid solution. If you use dilute hydrochloric acid, you must wash it with tap water. After the tile glaze is cleaned up, spray a thin layer of brightener on the surface of the tile and wipe it again with a soft cloth to keep the tile surface bright. And not easily contaminated. 
Buy Jiajiang tiles Raiders
When purchasing, we can observe from the surface. If the glossiness of Jiajiang tiles is very bright and smooth, this shows that the density of the tiles is very good. For a good tile, the glaze has a crystal clear and translucent feeling. Under the illumination of the light, the light is reflected like a mirror, and the poor tile, the glaze is dull, separated by one hand and the other hand hitting the surface of the tile. The sound produced by the high density ceramic tiles is crisp and bright, and the relatively low density sound of relatively poor tiles is dull. There will be no breakage after the straight vertical fall. This is determined by the strength of the tile, good tile strength, poor tile strength is low, it will break when it falls. 
The above information about the Jiajiang tile paving method and the related Raiders of Jiajiang Tile were introduced here. I hope this helps everyone. If you still don't understand where you can pay attention to more news, if you want to learn more about this news, please continue to pay attention to our website.
Door System,Pocket Door System,Sliding Door System,Sliding Door Security
MAURER TECHNOLOGIES CO., LTD. , https://www.maurer-elevator.com