2. During the fogging and frosting process of KATO infrared integrated camera, especially the outdoor infrared integrated camera often causes fog or frost on the protective cover glass due to seasonal changes, temperature difference between day and night, and rain and snow conditions. Causes the inability to see objects and directly affects the monitoring results. If advanced dehumidifying and defogging circuits are used, the saturated water vapor concentration in the body can be effectively controlled to achieve automatic defogging and defrosting.
Third, infrared angle infrared light is not the greater the better? Some people think that the larger the infrared light emission angle of view, the greater the scope of the lens selection, the use of wide-angle lens will not appear narrow viewing angle phenomenon. Facts have proved that there is a waste of light in infrared light with a large viewing angle and a lens with a small viewing angle. Therefore, engineers with practical experience will make the angle of view of the infrared lamp they choose to be consistent with the angle of view of the lens, so that the effect can reach the best state. In addition, the larger the emission angle of the infrared light, the better the picture effect. In some cases, if the infrared light angle is too large, the imaging will be affected. The result of doing so in a narrow corridor is that due to the large emission angle of the infrared light, the imaging of the near edge will be too bright to form a “light curtainâ€, while the center in the distance is not clear but a white fog. Therefore, the launch angle of infrared light is not only a matter of choice but also a technical problem. Different focal lengths of the lens should be selected to match the infrared angle of the launch angle, the infrared light emission angle, no matter what kind of conditions should not be greater than the lens perspective. Narrow-angle infrared light can achieve ideal wide-angle effects through reasonable selection and matching.
Chlorinated Rubber Super-CR
Chemical molecular formula: (C10H11Cl7) n
The chlorinated rubber is a derived product modified from the natural rubber through chlorination. It finds wide application in the production of coatings, inks, adhesives, etc. The company has a working capacity of 1500 tons of the chlorinated rubber with advanced technology and fine equipment. The quality of the product is stable and reliable. The product is trustworthy and well received by the customers.
In coatings to remarkably improve the coating properties such as weatherability and water resistance, insulation, inflammability, anti-acidity, anti-alkali, adhesion as well as impact strength. The chlorinated rubber coatings is widely applied to surface protection of materials for severe situation, such as shipping, offshore platforms, bridges, docks, containers, motor vehicle chassis, road signs, chemical equipment, etc. Additionally, high viscosity chlorinated rubber is applied to high-strength adhesives production, or added into other rubber products to improve its quality, while the low-viscosity product is applied to high-grade ink making.
Chlorinated Rubber
Chlorinated Rubber, Chlorinated Rubber Topcoat, Chlorinated Rubber for Painting
Shandong Novista Chemicals Co.,Ltd (Novista Group) , https://www.novistachem.com