TV set-top boxes, I believe that everyone is no stranger, and many families often use them in their lives. Then the problem comes, how to install the TV set-top box? If the installation is not correct, you can't use it. How to install it? Don't worry, the decoration house decoration network will introduce the installation of the TV set-top box in the following!
first step:
This method of installation is suitable for power failure. Connect a section of the white cable TV cable to the other end of the TV terminal box to connect to the RF input port on the set-top box. Need to pay attention to two points: 1 When the cable terminal box has two output ports of TV and FM, it needs to be connected to the TV output port. 2 If the RF input port on the back of the set-top box is spiral, you can use the adapter in the set-top box accessory to transfer.
The second step:
The three-color head audio and video line is used to connect the set-top box to the TV set. In contrast to the color, one end is inserted into the audio and video output port of the set-top box, and the other end is inserted into the audio-video input port in the same manner. There are two points to note here: 1 There are several groups of audio and video ports of a general TV, which are audio and video input ports and audio and video output ports, each of which is composed of AV1, AV2, ... or input 1, input 2.... In the way of labeling, the three-color audio and video should first be inserted into the audio and video input port according to the group, instead of inserting the audio and video output port. The 2 audio and video lines are inserted into which group of inputs, and which video of the TV is used to watch the digital TV.
Check the smart card to see if it has been properly placed in the set-top box. The correct way to place it is, with the smart card face up and the red arrow pointing inwards. The front panel of the set-top box has a card interface that allows the smart card to be placed correctly.
the fourth step:
Turn on the TV and set-top box power and use the video conversion button on the TV's remote control to bring the TV to the correct video. Note: The video conversion button of the remote control is usually set to “AV†or “AV/TVâ€, or “Videoâ€, TV/Video, “→⊙â€.
the fifth step:
The content played by the set-top box appears on the TV screen. If you want to search for the program, you need to follow the prompts or instructions to search, and then you can watch the program normally.
The installation of the TV set-top box is so much for everyone, I hope that the introduction of the decoration house decoration network can help everyone's life! If you want to know more about the relevant knowledge, please visit the decoration home decoration network to enter the encyclopedia of life to inquire!
Automatic Door Sliding Operator,Powerdrive System Automatic Sliding Door,Automatic Sliding Door System,Automatic Powerdrive
Caesar door control co.,ltd , https://www.caesar-door.com