Diatom mud is a new type of natural wall decoration material. Because of its environmental protection and non-polluting characteristics, it has been very popular among consumers for several years. Therefore, everyone pays special attention to the construction of diatom mud. Today, Xiao Bian gave it to everyone. Talk about the correct construction steps of diatom mud, learn how you can diy yourself!
First, add a small amount of colorant to the emulsion paint and mix well.
Second, use a wool roller to roll onto the wall. The roller is even and naturally dry.
Thirdly, select one of the boards that is to be combined and printed. Spray 3M adhesive on the back and spray evenly.
Fourth, according to the height requirements of the construction effect, the stencil printing plate is fixed to the wall surface.
Fifth, apply a masking tape on the wall where the site is located, and smooth the plate with your hand.
Sixth, use a sponge roller to stick an appropriate amount of metallic paint. After the adhesive material is even, roll the pattern and roll it evenly.
Seventh, gently press the stencil plate to prevent touching the pattern part and wait for the natural dryness.
Eighth, the back of the matching stencil printing board is coated with a 3M sticker on the back surface, and it is fixed on the wall by aligning holes.
Ninth, use a sponge roller to roll the metal paint to the pattern part and roll it evenly.
Tenth, gently pick up the stencil printing plate to prevent touching the pattern portion, natural dry, the effect is completed.
Tips: More practical decoration knowledge, real scene with the shoot, please pay attention to the palm of this site (micro signal: mall_jia).
Diatom mud
We have 2 types of Large Diameter Hose: Frac Hose and Layflat Hose.
Frac hoses were produced through-the-weave, easy cleaning and no drying required.
Designed for long service life. Tough and durable with exceptional resistance to abrasion
And cutting for use on wide variety of environment conditions.
Protected against mechanical damages.
Very low elongation (compared with vulcanized process) under pressure, prevents hose from [snaking".
High resistance to heat, fuels, chemicals, UV, ozone, weathering,hydrolysis,and microbiological attack.
Tube & cover: thermoplastic, polyurethane (TPU)
Reinforcement: High tenacity polyester filament, circular weaving.
The special extrusion through-the-weave process gives a very strong bonding between cover and lining as well as firmly encapsulation the woven polyester.
Temperature range from -50℃ to +70℃.
We can supply frac hoses with size: 8``,10``,12`` and 16``.
Large Diameter Hose
Large Diameter Hose,25Mm Reel Hose,32Mm Reel Hose,Large Diameter Rubber Hose
NANTONG SENTIAN FIRE-FIGHTING EQUIPMENT CO.,LTD. , http://www.firehosefactory.com