During the plum rain season decoration process, special attention should be paid to the good ventilation, drying and protection of the materials. The place where the materials are stacked should be as dry as possible. Dehumidification of the material stacking space can be performed using air conditioners and dehumidifiers as necessary. Temporarily unused wood should be wrapped in plastic packaging for future use to prevent moisture intrusion. Single-layer solid wood floor tiles are deformed.
The deformation of the tile occurs in the wooden floor in use. The main reason is that the multi-layer paint on the board surface has closed the fiber of the wood. The multi-layer paint film has a certain hardness to produce a stable pulling force on the surface layer, and the moisture absorption at the bottom of the plate is expanded. , the size of the board surface is not changed. The water content of the newly-delivered residential walls and slabs will be more than 30%, that is, the houses that have been handed over for several years, and the water content of the closed doors and windows is hard to come down. When the dry wooden floor (moisture content ã„‘ 12%), the bottom of the plate absorbs moisture and expands, and the plate becomes tile-shaped. The nail does not stop this deformation.
Whether it is a new building or an old building, serious slab tile deformation may occur in the hall. Because in the process of interior decoration, the bathroom, the kitchen tile, the floor tiles, in the hall and the ash, a lot of water seeps into the floor, the wind blows, the surface looks like it is dry, there are still a lot of inside the actual floor Moisture. They are absorbed by the bottom of the dried wood floor, causing the bottom of the board to expand to cause deformation of the plate. Although some people lay a layer of plastic film or foam film on the ground, if the film has a hole, the moisture on the ground will also enter the film, especially the surrounding film is not turned to the plate and pressed under the skirting board. And the moisture of the environment will swell from the surrounding floor into the bottom of the board. Since there is a moisture-proof membrane on the ground, the moisture entering the bottom of the board can not be emitted, and can only be absorbed by the dry wooden floor to cause deformation of the plate. Especially the single-layer solid wood flooring, without scientific drying, it is not surprising that deformation occurs.
In fact, the moisture content of the single-layer solid wood flooring popular in the market can basically meet the national standards. The single-layer solid wood flooring in use will appear dry shrinkage cracks, and the tile deformation phenomenon will not bear any responsibility. If the solid wood floor after installation is to reduce the quality problem, the keel should not be used to fix the wooden floor. The polystyrene extruded insulation board should be better than the wooden keel. The paving is simple without nail keel, heat preservation, heating, cold insulation, moisture resistance and resistance. Corrosion and good elasticity. It is more important to choose a scientific and practical solid wood flooring that is popular in the world. It can show your cleverness without any worries. Especially the designers of engineering projects and finely decorated houses should pay attention to this.
Exterior Shutters,Aluminium Sun Louver,Aluminium Louver Panel,Louvered Window
sliding doors Co., Ltd. , http://www.victor-doors.com