[Chinalco.cn] According to the provisions of the “Depth Regulations for the Drafting of Construction Engineering Design Documentsâ€, the architectural engineering design description includes the general design instructions and professional design instructions. According to the experience of participating in bidding during the past few years and the problems raised by various bid evaluation panelists, the author believes that the design instructions for building aluminum alloy aluminum curtain walls and aluminum alloy doors and windows are different from those for architectural design. The following sections are composed of:
(1) Project Profile The project profile includes:
a. Project name; b. Project address; c. Name of the owner; d. Engineering and architectural design unit; e. Project supervision unit; f. General description of the building (type of building structure, larger elevation of doors and windows or curtain wall, building level, etc.) g, project area: different structure forms, different panel materials of doors and windows, the subdivision area of ​​the curtain wall; the total area of ​​doors and windows curtain wall and other content.
(2) Design basis:
a. The current national standards, industry standards, and local standard standard names, standard numbers, and year numbers for the design of doors, windows, and curtain walls;
b. Names and file numbers of the relevant local regulations of the local governments at all levels where the project is based on the design of the doors, windows, and curtain walls;
c. The name, date of drawing, and edition of the architectural design drawing of the project designed by the architectural design institute on which the door, window and curtain wall design are based;
e. The specific requirements (if any) or the names and dates of the project bidding documents for the owners of the doors, windows and curtain walls.
Note:
1. Because of the current national standards, industry standards, and local standards, the standards for raw materials have already been stipulated. Therefore, in the design specification, it is not necessary in principle to list the material standards in detail.
2. When new materials that are not covered by the current national standards, industry standards and local standards are used in the project, the standard name, standard number and year number (or edition) of the selected materials must be listed in detail.
Local regulations of the local government where the project is located;
Other relevant raw materials, products and engineering acceptance national and industry standards and specifications.