As we all know, hydropower is a hidden project that cannot be seen in our daily life. Many friends did not attach much importance to the decoration of hydropower during the renovation process. This was a mistake. If the hydropower project is not handled well, it will cause us a lot of trouble after we check in. Remediating it again will be very complicated. Therefore, we should handle the hydropower problem before the acceptance of the hydropower project. Today, I will briefly introduce the top ten notices for the acceptance of water and electricity renovation .
What are the major aspects of decoration and hydropower acceptance?
1, circuit:
Generally speaking, the groove depth of the wall should be 1.5 times the diameter of the pipe; the pipe should be fixed at the corner using a pipe bender, and the length should be 200mm; the connection between the line pipe and the line pipe must have a lock and the interface. It must be glued tightly.
2, line box:
Whether strong or weak, a distance of 5mm should be maintained between the same box. However, if it is between strong and weak electricity, the distance between the cable boxes should be 150-200mm.
3, heating wiring:
If the floor of the home is equipped with floor heating, it is not possible to install the circuit in the second slot. Otherwise, the floor heating structure will be damaged, which will result in the unsatisfactory heating in the future.
4, heating inspection:
During the hydropower reform, the construction personnel must take 6pa pressure to construct and regularly test whether the floor heating has been destroyed. If you want to change your floor heating structure, consult a professional beforehand and decide on a construction plan.
5, bathroom hydropower reform:
As we all know, the bathroom will involve a lot of water pipes, and the standard of each type of water pipe is different.
(1) Water heater water pipe: The distance from the ground is 1.8m; the hot and cold water pipe spacing is 10cm.
(2) Shower room water pipe: Take the ground as the starting point, the water outlet is at least 1.2m, and the distance from the wall is 1mm. The upward water pipe connecting the water outlet must be 1m away to be fixed.
(3) Wash basin water pipes: The height of water pipes from the ground is generally 500mm; the distance between different water pipes is 10cm.
(4) Connect the toilet water pipe: The distance between the middle water pipe and the water pipe is 10cm.
(5) Mop pool pipe: The height of the pipe from the ground is 750mm.
6, fixed pipe:
Whether it is a kitchen or a bathroom, the distance from the wall of the outlet of the water pipe should be 1mm, and within 1m of the upward water pipe connecting the outlet can not be fixed.
7, waterproof:
The waterproof we usually say is actually referring to the bathroom. First of all, there should be no cracking or hollowing in the base of the wall ground. Waterproof materials are in line with standards; with the grass-roots level paste should be solid; brushing should be uniform; ground waterproof layer thickness of 300mm meters; the door and at both sides of the extended thickness is 300mm; wall waterproof layer brushing height is not the same in different areas. Bathtub is painted to 900mm; shower room is 1800mm; wash basin is 1100mm.
8, kitchen hydropower reform:
Under normal circumstances, the floor height of the kitchen water pipe should be 600mm; the height of the power box should be 1.35m above the ground.
9, bedroom switch:
The switch socket of the bedroom should be between 150-200mm away from the wall.
10, bathroom wall top line:
Due to the long-term wet conditions of the bathroom floor, it is usually the top choice. The standard is: the water pipe is under, the wire pipe is on, and the horizontal and vertical are guaranteed.
Editor's summary: The above is related to the decoration of water and electricity renovation acceptance , in the new house decoration process, hydropower engineering is a very important part, many people spend the energy when decorating the water and electricity is also the most, if the water and electricity wiring do not pay attention, it is easy to give Future life brings a lot of trouble.
Decoration and hydropower acceptance
Synthetic Cutting Oil,Soluble Cutting Fluid,Synthetic Cutting Fluid,Water Soluble Cutting Oil
FRANCOOL TECHNOLOGY (SHENZHEN)CO., LTD , https://www.francoolcn.com