Technical characteristics of ultra-thin stone honeycomb composite panels

Ultra-thin stone honeycomb composite board is a new type of building material. It has better impact resistance than ordinary natural stone. It is only 8~11kg per square meter, which is 1/7 of the weight of ordinary natural stone. Its compressive strength is it. 3 to 5 times of the total, it completely overcomes the defects of large weight and fragility of natural stone, and provides a new generation of building materials with better performance and wider application fields. The ultra-thin stone honeycomb composite board is simply to combine the stone sheet of about 3mm~5mm with the aluminum honeycomb substrate through the adhesive, which not only saves the stone material but also reduces the weight of the finished product, and can better reflect the stone effect in some. In buildings with high requirements for load bearing. However, since these materials are not used in our country for a long time, we have not applied them to the decoration of the curtain wall in a large area. Therefore, we must pay attention to the fact that the quality of the composite board cannot be judged by the common knowledge and physical and chemical indicators of ordinary stone. Professional testing institutions to detect, especially the bonding strength, aging resistance, water resistance and deformation coefficient of the surface material and the substrate.

Features of ultra-thin stone honeycomb composite panels:

1. Light weight: The thinest marble of the honeycomb honeycomb composite board can be only 3mm thick, which saves a lot of cost for transportation. It is the best choice for the building with load restrictions.

2. Increased strength: After the composite of stone and aluminum honeycomb panel, the strength of bending, bending and shear resistance is obviously improved, and the damage rate during transportation, installation and use is reduced.

3, anti-pollution ability: ordinary marble board in the installation process or in the future use process, half a year or a year, the marble surface appears a variety of discoloration and stains. The stone honeycomb composite panel back bolt can be used to avoid the rubber contamination of the metal pendant and the stone joint.

4, easier to control the color difference: because the marble composite board is cut into 3 pieces or 4 pieces with 1m2 original board into 3m2 or 4m2. The 3, 4m2 pattern is almost 100% identical to the color, so it is easier to ensure the consistency of color and pattern when used in large areas.

5, easy to install: due to the above characteristics, in the installation process, easy to install, improve efficiency and safety.

6. Sound insulation and moisture proof: The composite board made of aluminum honeycomb panel and marble has the properties of sound insulation, moisture proof, heat insulation and cold resistance because of its hollow hexagonal honeycomb core made of equilateral hexagon. Therefore, these characteristics far exceed the performance characteristics of ordinary marble slabs.

7. Reduce the cost: Because the stone composite material is thinner and lighter, the cost is reduced in transportation and installation, and for the more expensive stone varieties, the composite board is made to have different cost than the original board.

Miller Control

Miller Control,Ball Miller Control,Electric Control System,Electric Control System For Miller

Jiaozuo Huafei Electronic & Electric Co., Ltd. , https://www.intelligentmine.com

Posted on