If we need to use the nut on the thin iron piece, because the iron piece is too thin to be tapped and welded, it is necessary to use a rivet nut or a rivet nut. Rivet nuts and rivet nuts are widely used in the sheet metal industry. The installation of the rivet nut and the rivet nut requires the use of professional tools. What should we do if we need to use a rivet nut in our home life? Buy a rivet nut gun, not only a little expensive, but also not commonly used. We can do this using the suggestion tool.
The three rivet nuts in the figure below are 304 stainless steel hex rivet nuts, manganese steel hex rivet nuts, and manganese steel round rivet nuts from left to right.
Look for a long screw that matches the wire of the rivet nut. We are using M6*50 screws this time. Use a steel shovel to polish one end of the screw into a rectangular shape.
Find a plastic card and punch it.
String the rivet nut into the plastic card.
Screw on the back of the rivet nut.
Put a gasket on the screw.
Screw on an extension nut and slide the nut when the square is riveted.
Use a pair of pliers to clamp the length of the screw and use a wrench to tighten the lengthened nut to pull the rivet nut.
The riveting is complete, we can look at the back of the rivet nut.
Installed front side of the rivet nut.
Use the screw riveting, only the manganese steel round rivet nut pull riveting, because the 304 stainless steel hex rivet nut, manganese steel hex rivet nut material is hard, the use of screws can not be successful, or with the help of professional tools.
Stainless Steel Strips,Stainless Steel Strips Price,Cold Rolled Stainless Steel Strip,Decorative Stainless Steel Strips
Foshan Sunsteel Co. , Ltd , https://www.fssunsteel.com