Tripod Turnstiles, also known as Waist Height Turnstile, is a type of pedestrian Turnstile Gate , which is an intelligent entrance and exit terminal control device for people's passage. Dedicated to the personnel out of the entrance need to be security or control turnstile Gate , such as canteens, hotels, office buildings, museums, gymnasiums, clubs, subways, railway stations, terminals and other places.
First, tripod turnstiles meaning of maintenance and care
We know that the machine will use more or less some loss during use, in addition to the operation process should be strictly in accordance with the correct operation of the process, the rational use of the instrument, the maintenance of the machine is also crucial, because the standard maintenance can ensure The use of the instrument is running stable, smooth, idle time to avoid or slow corrosion, rust and other adverse factors on the machine.
Tripod turnstiles maintenance and repair work directly affects the service life of tripod turnstiles, so tripod turnstiles scheduled maintenance and maintenance work not only to do, but also according to requirements. Many users have been neglecting or not maintaining the machine normally after using tripod turnstiles. As a result, some parts may not be able to operate normally due to lack of timely lubrication or replacement, and the parts will be replaced after the machine stops working And maintenance of the machine, so that due to small loss, so the user must be aware of the use of tripod turnstiles the importance of maintenance.
Second, tripod turnstiles points of care and maintenance
In the order from outside to inside, we maintain the tripod turnstiles as follows:
1, Security Turnstile external maintenance
Tripod turnstiles currently on the market are made of domestic SU304 stainless steel, this material is rust-proof, durable features. Cleaning frequency can be set once a week: the main surface is clean, remove the rust spots, with a soft cloth and fossil powder to polish the appearance of the chassis, coated with anti-rust oil, just painted anti-rust oil do not rub by hand, such as 3- 5 hours of natural drying can be hand-contact, otherwise it will destroy the effect of surface rust. If it is painted tripod turnstiles, scratch paint surface layer can be found in the same color rust repair work.
2, security turnstile internal movement maintenance
Movement as the heart of the machine must be maintained. Maintenance frequency of a monthly maintenance: Open the cover cut off the power supply, clean the surface dust, the transmission part of the first clean plus butter or high concentration of oil lubrication. Check the fasteners for loose conditions, the fasteners tighten, check the wearing parts wear and found that the degree of wear exceeds the specified parts promptly replaced, check the positioning arm and the positioning plate is more than 3mm gap, such as There are timely replacement (normal clearance 1-1.5mm), the solenoid valve spool plus butter or oil, the solenoid valve to move around is to reduce resistance, get lubrication, can not be added too much, to be moderate.
3, security turnstile part of the internal circuit maintenance
According to the previous use, to see whether there is a problem with the electronic control section, there is no problem, then check whether the power is exposed to be bandaged, wire finishing, the wire is aging, to be replaced, refer to tripod turnstiles manual, check the various parameters. There are problems, to follow the rules, find the root of the problem, replace individual electronic components.
Special attention is that, in order to tripod turnstiles maintenance work can be standardized, safe and meticulous, there must be someone responsible for the maintenance of the security turnstile, especially the maintenance of electric parts, to be trained professionals, the principle of electronic control Fully understand, in order to mount operations.
Tire Killer Barrier barricades are a simple to install highly secure vehicle control barrier, ideally suited for approach entrances to banks, military installations, airports, docks, cash collection depots, government offices etc.
Tire killer barriers teeth retract below ground level when a signal is received from the push button or integrated Access Control unit providing safe access for authorised vehicles. When the vehicle has passed, the tire killer barriers teeth return to the active position, ensuring total protection from unauthorised vehicle intrusion.
Tire killer also called Tire-killers,Road blocking systems.
Tire Killer
Tire Killer,Tyre Killers,Road Safety Tire Killer,Yellow Steel Tire Killer
RS Security Co., Ltd. , http://www.rsteco.com