How many stages does the furnace temperature tracker need to test?
In the industrial production, many industrial products will carry out further processing on the products produced. In the hot processing of the products, special attention should be paid to the accuracy of the fine dispersion of the temperature, so that the quality of the products will not be affected to ensure the production of the products. cost. The furnace temperature tracker provides accurate temperature data so that the product is always at the highest temperature in the highest temperature test chamber and is constantly monitoring the temperature profile.
After the furnace temperature tracker is processed, the workpiece is dried and placed on a stainless steel "target=_blank> stainless steel mesh belt curing oven for curing. The curing temperature required for the curing process is 280-330 ° C, time 25-40 Min, through the furnace. The measurement of the actual process temperature curve of the temperature tracker can determine the furnace temperature and the speed of the mesh belt required for different varieties and specifications.
The curing furnace adopts the hot air circulation mode, and the dispersing machine furnace temperature tracker removes the water vapor and the evaporated organic matter by heating and exhausting the air. The solidified roughness meter furnace can use electricity, oil and gas as fuel, and the appearance color of the product is good but the cost is obtained by electric heating. high.
A furnace temperature tracker coating line with an annual output of 5,000 tons of standard parts, if using electric heating, requires a curing oven with a length of 18m and a power of 300kW.
The furnace temperature tracker curing is divided into two stages: preheating in the first stage, heat absorption of the workpiece, temperature 60-80 ° C, time 10 Min, the temperature should not be too fast at this stage, the workpiece must be warmed up by the leveling step The moisture in the coating gradually evaporates to avoid foaming of the coating.
The second stage is the high temperature curing of the coating. At this time, the temperature of the curing furnace must be controlled within the required range. It should not be too high or too low, because the furnace temperature tracker determines the final performance of the coating on the workpiece. .
For information on the furnace temperature tracker, it is recommended to browse: http://
Http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Tool Chests are equipped with heavy duty ball bearing slides and you can put them on roller cabinets.
Tool Chests
Side Tool Cabinet,Rolling Tool Chest,Heavy Duty Tool Box,Tool Storage Chests
Changzhou Xingsheng Tianhe Electric Appliance Co., Ltd , https://www.roller-tool-cabinet.com