[Asia Fluid Network News] Low-temperature coolant circulation pump is mainly used in mechanical form of refrigeration cryogenic liquid circulation equipment. Low-temperature coolant circulation pump has to provide low-temperature liquid, low temperature water bath role. Combined with rotary evaporator, vacuum freeze-drying oven, circulating water vacuum pump, magnetic stirrer and other equipment. What should users pay special attention to when using these products? The attention of these issues may have what effect on the user. Low-temperature coolant circulation pump Precautions What are the precautions for using the low-temperature coolant circulation pump? 1, before using the low-temperature coolant circulation pump in the tank should be added to the liquid medium (pure water, alcohol, antifreeze can be), the medium level should not have cooling coil within the tank and lower than the table 20mm is appropriate; , Power: 220V50Hz, the power supply should be greater than the total power of the instrument, the power supply must have a good "grounding" device; 3, to avoid acid-base substances into the tank corrosion coil and the liner. 4, the instrument should be placed in a dry and ventilated place, no obstacles within 300mm around the instrument; 5, often observe the level of the tank surface, when the liquid level is too low, liquid media should be added in time; In addition to the most important points above, Users should also pay attention to when the low temperature coolant circulation pump operating temperature is low, should be careful not to open the cover, hands do not enter the tank, to prevent frostbite; use is completed, all the switches are turned off, cut off the power; liquid outside the loop , The customer should pay special attention to the firmness of the outlet pipe connection and prevent it from falling off so as to avoid liquid leakage. Instruments should be regular cleaning, long time do not have to empty the tank of the media, and wipe clean, keep the work surface and the operation panel clean. Care about these issues is likely to have great significance for the future work and production.
SJ-Swaco BEM-3 Shaker Screen with dimension of 1155× 903mm, is produced to meet the exact API specifications as a replacement screen for BEM series shale shakers from M-I SWACO. It is commonly compatible with the BEM-3 shaker. Banded steel hook edges prevent the screen from flattening and eliminating mesh pull-out caused by fine wire mesh or high tension screens. There are various mesh combinations available according to different drilling applications. XR or XL mesh range from API 18 to API 325.
Technical Parameter
-
Mesh Material: stainless steel 304/316/316 L.
-
Frame Material: Q235 steel.
-
Screen Type: XL, XR.
-
API RP 13C Designation: API 18 – API 325.
-
Package: packed in paper carton, shipped by wooden case.
Adaptable Shale Shaker Model
SJ-SWACO BEM-3 shaker screens are used as the substitute screen for
-
SWACO BEM-3 shale shaker.
Competitive Advantage
-
100% interchangeable with OEM brands screen panel size.
-
SS 304/316 wire mesh cloth does not rust or delaminate.
-
Hook strip soft screen with maximum non-blank areas.
-
Manufactured according to the API RP 13C (ISO 13501).
-
Scientific & reasonable cost control system for competitive price.
-
Adequate inventory in the shortest time to meet customers' demand.
Remarks:
M-I SWACO, ALS-2 are marks of M-I L.L.C.
ShengJia only produces the replacement screens but not original from M-I SWACO.
Swaco BEM-3 Shaker Screen
Swaco Bem-3 Shaker Screen,Sweco Screens,Swaco Bem-3 Shale Shaker Screen,Swaco Bem-3 Oil Shale Shaker Screen
Anping Shengjia Hardware Mesh Co.,ltd , https://www.oilshakerscreen.com