CLB asphalt pump insulation is a gear pump structure of asphalt insulation pump for pumping, conveying and spraying high temperature bitumen (residue) liquid can also be used at room temperature for suction, delivery of non-high volatility, low Flash point of petroleum products, such as various kinds of engine oil, heavy oil and other machinery. With reliable operation, simple and compact structure, small size. The insulation gear pump is rotary, mainly by the pump body, base, drive gear, driven gear and safety valve body and other components, the drive shaft is supported by an additional oil sleeve, through the oil cup to add HG-24 saturation Cylinder oil lubrication. The gear pump is provided on both sides with a conical pipe thread connector for connection to the inlet pipe. The taper pin is internally threaded for ease of disassembly. The seal pad also serves to adjust the axial clearance of the gear, which is defined as Unidirectional between 0.05-0.08mm. There are four holes in the lower part of the machine for installation. The safety gear pump is equipped with safety valve. The working pressure has been set to 1 + 0.05mpa and sealed by the factory.
Angle bar with a variety of stress component suitable to different structures requests , can be used as connections between components. Widely used in a variety of architectural and engineering structures, such as roof beams, bridges, transmission towers, hoisting and conveying machinery, ships, containers,
Industrial furnaces, reaction towers and storage shelves etc.
Angle Bar
Steel Angle Bar,Stainless Steel Angle Bar,Slotted Angle Bar,Galvanized Angle Bar,Equal Steel Angle Bar,Unequal Steel Angle Bar
TIANJIN ZHENXIANG STRIP PROCESSING CO., LTD. , http://www.zhenxiangsteel.com